Home » Posts tagged 'vSphere6'

Tag Archives: vSphere6

Cisco ACI + Nutanix + New vCenter – Its Complicated or Is it ?

Before I start, its been a while since my last post, mainly because I have been really busy with work and family. Now hopefully I will make it habit to post something useful once every few weeks.

Disclaimer: This is not the **official** recommendation from Nutanix on Cisco ACI. This is just something that I worked on for a client of ours and thought would be useful for anyone who might end up deploying Nutanix + Cisco ACI + new vCenter on Nutanix NDFS :)..

Problem Statement: Cisco ACI requires OOB access to vCenter to deploy the Cisco ACI networks as Portgroups in vCenter. Build vCenter on NDFS. NDFS needs 10 Gb fabric (ideally) from each node. All the uplinks in the leaf switch are controlled by Cisco ACI. But ACI needs vCenter to push out Management and VM Network VLANs. 

Some of you might see this and go uh oh, but let me assure you, this also becomes a problem in non Nutanix environments as well; especially anyone using IP based storage and only have 2 x 10Gb adapters.

There are 2 ways in which we can take care of this.

Option 1: Deploy a vCenter in a management only cluster, which doesn’t depend on the Cisco ACI for Networking. (Needs seperate physical infrastructure for networking and for management cluster)

Option 2: Add another dual 10Gb Nic to each of the nodes. (becomes a lot more expensive when you think of tens of nodes x 4 10Gb adapters).

Both the above options are quite costly, be it from a networking physical infrastructure point of view or a management only cluster point of view.

So how do we go about solving this?

(more…)

Upgrading to vSphere 6: Part 3 – Upgrading standalone SSO Server

This is part 3 in the multi part series for Upgrading to vSphere 6.

Part 1: How and What to plan for 

Part 2: Upgrading a simple install

(more…)

Upgrading to vSphere 6: Part 2- Upgrading a simple install.

This is part 2 of the multi part series for Upgrading to vSphere6.

Part 1: How and What to plan for  (more…)

Upgrading to vSphere 6: Part 1 – How & What to plan for.

So vSphere 6.x is now here. A lot of blog posts have covered whats new and the new limits for the new Suite.

A quick recap of whats new is (abstract from Duncan Epping’s Blog):

(more…)

VSPEX Blue – First Thoughts !

VSPEX Blue is EMC’s EVO:RAIL. They have made enough modifications to warrant a special mention but they haven’t tried to include any storage ‘appliance’ unlike NetApp so the base EVO architecture remains unchanged. Sorry this isn’t a dig at NetApp but stating the obvious.  Duncan Epping has a lot of useful information about EVO:RAIL and Cormac Hogan has an excellent blog series about VMware VSAN. So I am not going to explain what EVO:RAIL architecture is and how VMware VSAN works. (more…)

Koodzo

Check Out koodzo.com!

Categories

Archives